Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix35
    4. : How to replace the battery in the remote control of the Hyundai Ix35?

Hyundai ix35 - Video tutorial

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Key
Operation: How to replace the battery in the remote control of the Hyundai Ix35?

In order to replace the battery of the Hyundai Ix35 remote control, you have to remove the key that is connected to the chrome plating located in the upper part of the remote control. Once the key has been removed, it will be necessary to pry inside its housing to be able to divide the two halves even making up the remote control. By opening the remote control, it will be possible to notice the battery placed on top of the chip: it will therefore be possible to remove it and replace it with a new spare part. After the replacement, the two halves of the remote control will have to be reassembled together and the emergency key inserted.


Posted on 8 June 2022 by ScegliAuto

    Frequently Asked Questions

    • Ix35 2009-2015 - What to do if the Hyundai Ix5 does not detect the key? Read Answer
    • Ix35 2009-2015 - How to open the remote control of Hyundai Ix35? Read Answer
    • Ix35 2009-2015 - Why does the Hyundai IX35 not recognize the key? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos