Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Hyundai Tucson

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Air filter

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the air filter on a Hyundai Tucson. First, lift the bonnet and secure it with the prop rod. Start by removing the clips from the air intake duct using pliers.

Once the clips are removed, push the air intake duct forward, which will also move the air filter box. Pull out the air intake duct, then use a 10 mm socket to disconnect the negative and positive terminals of the battery. Next, remove the bolt under the battery that holds it in place (use a 12 mm socket).

Once the battery is removed, take out the air filter box by unscrewing a 10 mm screw and also removing the clamp with a 10 mm screw. Once the box is removed, you can pull out the old filter and replace it with the new one.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in the 2018 Hyundai Tucson
How to Replace the Cabin Air Filter in the 2018 Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) Regularly replacing the cabin air filter in your 2018 Hyundai Tucson is very important, and this guide will explain how to perform this operation wit…
How to Replace the Engine Air Filter of the 2016 Hyundai Tucson
How to Replace the Engine Air Filter of the 2016 Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) To correctly complete the replacement of the engine air filter for your third-generation Hyundai Tucson (2016), simply follow the steps described in …
How to Replace the Air Filter on a Hyundai Tucson
How to Replace the Air Filter on a Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) To replace the air filter on a Hyundai Tucson, open the bonnet to access the filter housing located in the engine bay. The housing is at the front, n…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos