Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heating Radiator in the Hyundai Tucson?

Model: Hyundai Tucson JM, MK 1 - Years 2004-2009
Part: Radiator

To replace the heating radiator in the Hyundai Tucson, open the bonnet to disconnect the hoses connected to the radiator at the back of the engine bay. Once the hoses are disconnected, remove the panel located directly above the pedals. This will allow you to disconnect the radiator from additional hoses and connectors and remove it from its housing. The old radiator can then be replaced with a new spare part, and the panel above the pedals should be reattached.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Cabin Heater Radiator on a Hyundai Tucson
Guide to Replacing the Cabin Heater Radiator on a Hyundai Tucson
Hyundai Tucson (2015-2021 / TL, MK 3) This guide outlines the main steps to remove and replace the cabin heater radiator on a Hyundai Tucson. First, open the bonnet of your car and discon…
Where to Find the Fuse Box of the 2015 Hyundai Tucson
Where to Find the Fuse Box of the 2015 Hyundai Tucson
Hyundai Tucson (2015-2021 / TL, MK 3) To find all the fuses in your 2015 Hyundai Tucson safely and quickly, read this guide and follow the steps outlined. First, ensure your Hyundai Tucso…
Where is the fuse box of the Hyundai Tucson 3 located?
Where is the fuse box of the Hyundai Tucson 3 located?
Hyundai Tucson (2015-2021 / TL, MK 3) If you need to intervene on the fuses of your third edition Hyundai Tucson, but you don't know where they are located, then all you have to do is rea…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos