Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear wiper motor on the Hyundai Tucson?

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Windshield wipers

See other generations:
Video tutorial

To remove and replace the wiper motor, follow these steps: Lift the plastic cover at the base of the wiper arm, unscrew the securing nut, and remove the wiper itself. Open the tailgate and remove the inner panel, locate the support plate of the motor which is secured with 3 screws that need to be removed.

Additionally, disconnect the electrical connector. Then, slide the motor out of the hole in the rear window.

At this point, you can either repair the motor or replace it with a new one. Reposition the motor and reassemble everything.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on the Hyundai Tucson?
How to Replace the Wiper Blades on the Hyundai Tucson?
Hyundai Tucson (2022-2026 / NX4, MK 4) You can replace the wiper blades on the Hyundai Tucson by lifting the corresponding arms so that the blades do not touch the windscreen. Once lifted,…
How to Replace the Timing Chain on the Hyundai Tucson
How to Replace the Timing Chain on the Hyundai Tucson
Hyundai Tucson (2015-2021 / MK 3, TL) To replace the timing chain on the Hyundai Tucson, it is advisable to remove the entire engine block from its bay after loosening the bolts that secu…
How to Dismantle the Inner Panel of the Tailgate on the Hyundai Tucson
How to Dismantle the Inner Panel of the Tailgate on the Hyundai Tucson
Hyundai Tucson (2010-2015 / MK 2, LM) These brief and simple steps will show you how to dismantle and replace the panel or inner trim of the tailgate on the Hyundai Tucson. First, open th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos