Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Light Bulb on the Hyundai I20

Model: Hyundai I20 GB, MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Tail light bulb

See other generations:
Video tutorial

To replace the brake light bulb on the Hyundai I20, open the boot. Insert a small flathead screwdriver into the gap in the plastic between the light and the tailgate seal to remove it. Once the plastic is off, unscrew the two screws holding the light.

After removing the light, slightly rotate the bulb holder counterclockwise, press the bulb, rotate it slightly, and pull it out. With the old bulb removed, take the new bulb, insert it into the bulb holder, press, and rotate it slightly. Reinsert the bulb holder into the light, rotating it. Once the bulb holder is back in place, position the light, screw in the two screws, and replace the plastic near the light until you hear a click.

Finally, check the new bulb is functioning correctly.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Hyundai i20?
How to Replace the Front Headlamp Bulb on a Hyundai i20?
Hyundai I20 (2008-2014 / MK 1, PB) To replace the front headlamp bulb on a Hyundai i20, lift the bonnet to access the engine bay and remove the circular cap located at the rear of the …
Removing the Rear Door Panel on the Hyundai i20 MK1
Removing the Rear Door Panel on the Hyundai i20 MK1
Hyundai I20 (2008-2014 / MK 1, PB) In this short video, we will see how to remove the rear door panel on the first series Hyundai i20 by following these simple steps. First, open the r…
Reset the Tyre Pressure Warning Light on the Hyundai I20 MK3
Reset the Tyre Pressure Warning Light on the Hyundai I20 MK3
Hyundai I20 (2008-2014 / MK 1, PB) This guide outlines the steps to reset the tyre pressure warning light on the Hyundai I20 third generation. Before proceeding, ensure that all four t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos