Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Rear Door Panel on the Hyundai i20 MK1

Model: Hyundai I20 MK 1, PB - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

In this short video, we will see how to remove the rear door panel on the first series Hyundai i20 by following these simple steps. First, open the rear door of your car and start by unscrewing all the screws securing the panel, which are hidden by plastic caps and on the side, using a cross screwdriver; then, leverage the sides to unclip the panel from the rear clips, as shown in the video.

Finally, disconnect the handle cable and the electric window switch cable for the complete removal of the panel!


Updated on 18 April 2026 by ScegliAuto


Related tutorials

Hyundai I20 (2008-2014 / MK 1, PB) Learn how to reset the maintenance light on the instrument cluster of the Hyundai I20. Start the instrument cluster with the appropriate remote key, …
Hyundai I20 (2008-2014 / MK 1, PB) To remove the steering wheel airbag from a Hyundai I20, you need to loosen the screws located on the side of the steering wheel. There are two screws…
Hyundai I20 (2008-2014 / MK 1, PB) To replace the front headlamp bulb on a Hyundai i20, lift the bonnet to access the engine bay and remove the circular cap located at the rear of the …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos