Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove a Door Handle from Hyundai i20

Model: Hyundai I20 PB, MK 1 - Years 2008-2014
Part: Handle

To remove the external door handle, open the door and locate a rubber cap on the side of the door panel that needs to be removed. Underneath, there is a 10 mm nut that needs to be unscrewed with a socket wrench. Next, close the door and lever from the outside to extract the lock with the key, then close the door and apply pressure to slide the handle outwards. At this point, the handle will unclip and can be removed. Finally, reassemble by reversing the disassembly steps.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Key Fob Shell on the Hyundai I20
How to Remove and Replace the Key Fob Shell on the Hyundai I20
Hyundai I20 (2008-2014 / PB, MK 1) In this short and simple video, you will understand the main steps needed to remove and replace the key fob shell on the Hyundai I20. First, take you…
How to Replace the Timing Chain on a Hyundai i20
How to Replace the Timing Chain on a Hyundai i20
Hyundai I20 (2008-2014 / PB, MK 1) Before you begin, open the front bonnet of your Hyundai i20. Start by removing the injectors and the upper section of the cylinder head by unscrewing…
How to Remove the Starter Motor from the Hyundai I20
How to Remove the Starter Motor from the Hyundai I20
Hyundai I20 (2014-2020 / MK 2, GB) In this guide, find the main instructions on how to remove and replace the starter motor of the Hyundai I20, as well as the I10. First, open the bonn…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos