Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Hyundai i20?

Model: Hyundai I20 MK 1, PB - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Light bulb

See other generations:
Video tutorial

To replace the front headlamp bulb on a Hyundai i20, lift the bonnet to access the engine bay and remove the circular cap located at the rear of the headlamp. Once the cover is removed, you can pull the bulb out of its housing and disconnect it from its connector.

After removing the old bulb, insert a new one, connect it to the connector, and push it back into its housing. After installation, close the headlamp with the appropriate cap.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Light Bulb on the Hyundai I20
How to Replace the Rear Brake Light Bulb on the Hyundai I20
Hyundai I20 (2014-2020 / GB, MK 2) To replace the brake light bulb on the Hyundai I20, open the boot. Insert a small flathead screwdriver into the gap in the plastic between the light …
How to Replace the Battery in the Hyundai I20 Remote
How to Replace the Battery in the Hyundai I20 Remote
Hyundai I20 (2014-2020 / GB, MK 2) In today's tutorial, we will see how to replace the battery in the remote for the Hyundai I20. First, take your key and press the button to release t…
How to Remove the Starter Motor from the Hyundai I20
How to Remove the Starter Motor from the Hyundai I20
Hyundai I20 (2014-2020 / GB, MK 2) In this guide, find the main instructions on how to remove and replace the starter motor of the Hyundai I20, as well as the I10. First, open the bonn…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos