Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on the Toyota Proace

Model: Toyota Proace Verso MK 1 - Years 2016-2026
Part: Warning light – error code

After performing an oil change and replacing the oil filter on this vehicle, and thus completing the service, you can proceed to reset and update the service indicator that has illuminated on the instrument panel. To do this, follow the simple instructions below: first, access the driver's seat and do not turn on the ignition. Then, locate the button on the instrument panel at the bottom left, identified by the spanner symbol. Press and hold this button while simultaneously turning on the ignition; this will start a 10-second countdown, after which the service indicator will turn off.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on a Toyota Proace?
How to reset the Service light on a Toyota Proace?
Toyota Proace Verso (2016-2026 / MK 1) To reset the Service light on a Toyota Proace, press and hold the button located in the centre of the dashboard while it is off. Continue holding the…
How to Reset the Service Light in the Toyota Proace?
How to Reset the Service Light in the Toyota Proace?
Toyota Proace Verso (2016-2026 / MK 1) Here’s a video guide aimed at Toyota cars in general, produced from 2019 to 2024, therefore applicable to the Toyota Proace. The goal is to clear the…
How to Reset the Service Light on a Toyota Proace
How to Reset the Service Light on a Toyota Proace
Toyota Proace Verso (2016-2026 / MK 1) To reset the Service light on the Toyota Proace, press and hold the button located on the right side of the cluster while it is off: continue holding…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos