Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Door Panel Speaker

Model: Hyundai Santa Fe MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Speaker

See other generations:
Video tutorial

To replace the passenger side door speaker, first remove the panel: start by taking off the protective caps covering the fixing screws located inside the opening lever slot, along the side of the panel, and inside the armrest handle; once the screws are removed, unclip the retaining clips along the edges and disconnect the connectors to complete the removal.

Once the panel is off, the speaker, fixed with four screws to a plastic support, is easily accessible: at this point, fit the new speaker to this support by soldering the connector wires; once the new speaker is prepared, reverse the steps for installation back into the vehicle.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Removing the Original Car Radio
Removing the Original Car Radio
Hyundai Santa Fe (2006-2012 / MK 2) Remove the screws securing the knee pad on the driver's side to slightly move it away from its position (this is necessary to allow the removal of th…
How to Replace the Front Speaker of the Hyundai Santa Fe
How to Replace the Front Speaker of the Hyundai Santa Fe
Hyundai Santa Fe (2012-2018 / MK 3) In this video tutorial, learn how to remove and replace the front speakers of the Hyundai Santa Fe. First, open the front door of your car and start …
Replacing the Internal Door Handle
Replacing the Internal Door Handle
Hyundai Santa Fe (2000-2006 / MK 1) To replace the internal opening handle (which also includes the lock control), you must remove the door panel: start by removing the cap inside the t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos