Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. aura
    4. : How to set a maintenance interval on Hyundai Aura

Hyundai aura - Video tutorial

Model: Hyundai aura AI3 - Years 2020-2024
Part: Instrument cluster
Operation: How to set a maintenance interval on Hyundai Aura

For this guide, we will see how to set up a maintenance interval on the Hyundai Aura. It should be noted that the following guide applies not only to the Aura, but also to all other Hyundai models roughly equivalent in terms of year of production, range and trim levels. So, if you have a Hyundai car or one with a multifunction display in the instrument cluster or digital infotainment, regardless of model, you can follow these steps. It is therefore necessary to: 1. From the infotainment, press the Setup button, then on Vehicle, then on Maintenance, Maintenance Interval and enable the tick; 2. From the multifunction display, use the buttons to the right of the steering wheel, enter settings, then scroll down to service interval and enable the tick. It is also possible to enable a maintenance reminder by also setting a certain mileage beyond which the warning will also be released. To enable it, simply follow the steps in the demonstration video.


Posted on 5 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos