Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Hyundai i40

Model: Hyundai I40 MK 1 - Years 2011-2019
Part: Car stereo

In this guide, you will discover how to correctly remove the standard radio from your Hyundai i40 (2011-2019). First, reach the driver's seat and open the door. Remove the panel at the end of the dashboard and unscrew the various screws located just below. Next, remove the entire panel in the lower dashboard area and unscrew the screws present there as well. Finally, remove the central part of the dashboard and pull the radio towards you. Disconnect the cables, and you are done.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Hyundai I40 located?
Where is the OBD port of the Hyundai I40 located?
Hyundai I40 (2011-2019 / MK 1) If you are planning to use the OBD port of your Hyundai I40 but do not know where it is located, do not worry because in the following guide you will…
How to change the car radio of the Hyundai I40
How to change the car radio of the Hyundai I40
Hyundai I40 (2011-2019 / MK 1) Today's instructions will show us the process of disassembling and replacing the stock radio with a new multimedia system for the Hyundai I40. First,…
How to Remove and Replace the Gear Knob on the Hyundai i40
How to Remove and Replace the Gear Knob on the Hyundai i40
Hyundai I40 (2011-2019 / MK 1) This guide shows you how to remove and replace the gear knob on the Hyundai i40 in simple, quick steps. First, get in the vehicle and start by detach…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos