Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Sonata
    4. : Front indicator bulb replacement

Hyundai Sonata - Video tutorial

Model: Hyundai Sonata - Years 2004-2014
Part: Light bulb
Operation: Front indicator bulb replacement

The front indicator light bulb is integrated in the headlight but there is no room for maneuver in the engine compartment to access the lamp holder; it will therefore be necessary to reach the lamp holder through the wheel arch, turning the wheels all inwards: luckily the designers have prepared a sort of window through which to access the light and it will therefore not be necessary to remove the complete wheel arch; therefore, once the wheels have been steered, unscrew the fixing screws of the cap and remove it in order to access the headlight housing and unhook the front indicator lamp holder; then replace the bulb (bayonet coupling) and proceed in reverse for installation.


Posted on 26 August 2023 by ScegliAuto



Rear indicator bulb replacement
Hyundai Sonata (2004-2014 / ) If by activating the control of the arrows you notice that the warning light flashes very quickly on the instrument panel, then it means that on that
Headlight bulb replacement
Hyundai Sonata (1998-2005 / EF) Open the front hood and unhook the protective cap of the bulb holder by turning it anti-clockwise; disconnect the power supply socket, unhook the bul
Check the efficiency of the direction indicators
Hyundai Sonata (2004-2014 / ) One of the methods to understand if one of the direction indicator bulbs (or arrows as we are used to calling them) is damaged, is to see if the rela

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos