Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Atos
    4. : Where is the fuse box located in the Toyota Atos?

Hyundai Atos - Video tutorial

Model: Hyundai Atos MK 1 - Years 1997-2008
Part: Fuse box
Operation: Where is the fuse box located in the Toyota Atos?

If you are looking for the fuse box of your Toyota Atos but haven't been able to find it yet, do not worry because in the following mini guide you will find all the necessary indications. First, park the car safely and turn it off completely. Lift the front hood and, if you intend to maintain one or more fuses, proceed with disconnecting the battery. Immediately after, locate the box containing the various fuses and unscrew the screws that hold the cover in place. Remove the cover and immediately below you will finally have access to the fuses.


Posted on 27 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Atos 1997-2008 - Where is the fuel pump fuse of the Hyundai Atos located? Read Answer
    • Atos 1997-2008 - Where is the windshield wiper fuse located in the Hyundai Atos? Read Answer
    • Atos 1997-2008 - Where is the fuse box on the Hyundai Atos 2002 located? Read Answer
    • Atos 1997-2008 - What is the fuse for the wipers on the Hyundai Atos Mk1? Read Answer
    • Atos 1997-2008 - Where is the Hyundai Atos wiper fuse located? Read Answer
    • Atos 1997-2008 - Where is the windshield fuse located in the Hyundai Atos? Read Answer
    • Atos 1997-2008 - Where is the third stop fuse of a Hyundai Atos located? Read Answer
    • Atos 1997-2008 - Where are the 2006 Hyundai Atos Prime fuses located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos