Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Sonata
    4. : Rear light bulb replacement

Hyundai Sonata - Video tutorial

Model: Hyundai Sonata - Years 2004-2014
Part: Rear light bulb
Operation: Rear light bulb replacement

To replace the rear light bulbs (that of the arrow or the clearance light) it is not necessary to remove the light as it is possible to remove a portion of the covering inside the luggage compartment, in correspondence with the headlight seat. a sort of window that allows access to the lamp holders; once you have reached the rear part of the lighthouse, release the lamp holder by rotating it counterclockwise by about 90 degrees and extract the bulb from the inside (T10 socket) to be able to insert the new one (you could also opt for one of the LED type ) and hang the lamp holder back in its seat.


Posted on 28 August 2023 by ScegliAuto



Rear indicator bulb replacement
Hyundai Sonata (2004-2014 / ) If by activating the control of the arrows you notice that the warning light flashes very quickly on the instrument panel, then it means that on that
Interior ceiling light led bulb replacement
Hyundai Sonata (1998-2005 / EF) Choose the new replacement bulb identical to the one to be replaced. In this case a LED bulb is mounted in the ceiling light instead of the old torpe
Interior ceiling light led bulb replacement
Hyundai Sonata (2004-2014 / ) Choose the new replacement bulb identical to the one to be replaced. In this case a LED bulb is mounted in the ceiling light instead of the old torpe

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos