Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulbs on the Hyundai i10

Model: Hyundai I10 AC3, AI3 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight

See other generations:
Video tutorial

If the dipped beam bulb on your Hyundai i10 burns out, replace it as soon as possible for your safety and to avoid penalties. Open the bonnet and position yourself in front of the headlight containing the bulb to be replaced.

On the side of the headlight facing the engine, you will find a protective cap that you can remove by turning it a few centimetres. The working space is limited; if you are working on the driver's side, you can gain access by removing the cover of the fuse box. This gives you access to the bulb, which you can remove after unfastening a metal clip that holds it in place.

Disconnect the electrical connector and replace it with a new bulb.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

Replacing the Bulbs in the Front Headlight of a Hyundai i10
Replacing the Bulbs in the Front Headlight of a Hyundai i10
Hyundai I10 (2013-2020 / MK 2, IA) Let's replace the bulbs in the front headlight of a Hyundai i10. Here’s how to proceed: Open the bonnet by pulling the lever located at the bottom ri…
Replacement of the front headlight of the Hyundai I10
Replacement of the front headlight of the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Today we will see the instructions for disassembling and replacing the front headlight of the Hyundai I10. First, we open the hood of the car and sta…
How to Remove the Rear Light and Bulb of the Hyundai I10
How to Remove the Rear Light and Bulb of the Hyundai I10
Hyundai I10 (2013-2020 / MK 2, IA) In this brief guide, we will provide the necessary instructions to remove and replace the rear light and its bulbs on the Hyundai I10, following thes…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos