Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Hyundai Ix35?

Model: Hyundai ix35 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

Video tutorial

To replace the cabin filter on a Hyundai Ix35, open the glove compartment located on the passenger side. Once the glove compartment is open, detach the two side clips that secure it at the back.

After removing these clips, lower the glove compartment completely to access the rear. Once the cover of the filter box is removed, extract the old filter and replace it with a new one. After replacement, reassemble all previously removed parts.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Hyundai IX35?
How to Reset the "Service" Light on a Hyundai IX35?
Hyundai ix35 (2009-2015 / MK 1) Before you start, sit in the driver's seat of your Hyundai IX35. Begin by activating the instrument panel by pressing the ignition button. Next, repe…
How to replace the cabin air filter of the Hyundai IX35
How to replace the cabin air filter of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) If you do not know how to replace the air filter inside the cabin of your Hyundai ix35, do not worry because in the following guide you will find all…
How to Replace the Air Filter of the Hyundai IX35
How to Replace the Air Filter of the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) The engine air filter of a Hyundai IX35 should be replaced at every service interval, but you can also replace it earlier if necessary. To replace th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos