Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of the Front Headlamp.

Model: Hyundai Sonata - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight

See other generations:
Video tutorial

First, open the engine bay bonnet. Use the appropriate spanner to remove the two upper bolts securing the headlamp in position.

Remove the bolt located inside the engine bay that secures the headlamp at the bottom of its housing. At this point, disconnect the electrical power cables by pressing the clip in the socket and pulling it out. Once this is done, extract the headlamp unit by pushing it from inside the engine bay towards the outside.

For fitting the new headlamp, simply follow the reverse of the removal steps. The vehicle shown in the images is a Hyundai Sonata.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Dismantling/Replacing the Front Headlight
Dismantling/Replacing the Front Headlight
Hyundai Sonata (2004-2014 / ) In the past, a headlight could be dismantled in every part, but as you may know, this is no longer the case as headlights, like rear lights, are now …
Replacement of Front Headlamp Bulb
Replacement of Front Headlamp Bulb
Hyundai Sonata (1998-2005 / EF) To completely remove the front lighting assembly, open the bonnet and remove the two screws that secure the headlamp at the bonnet side and the third…
Replacing Front Headlight Bulb
Replacing Front Headlight Bulb
Hyundai Sonata (2004-2014 / ) To replace the front headlight bulb (H7 fitting), you do not need to remove the headlight. Simply rotate and remove the protective cap, disconnect th…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos