Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Headlamp Bulb

Model: Hyundai Sonata EF - Years 1998-2005
Part: Headlight bulb

To completely remove the front lighting assembly, open the bonnet and remove the two screws that secure the headlamp at the bonnet side and the third one located at the bottom of the frame. Carefully slide the headlamp assembly out of its housing by pulling it towards you. Remove the protective cap and then the electrical connector. Take off the lamp retaining spring by gently pulling it to remove it from the lamp holder. Install the new bulb without touching the glass with your hands. Refit the lamp holder in its respective housing and reposition the headlamp assembly in its place, closing the plastic cap and securing it with the two clips.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Front Indicator Bulb
Replacement of Front Indicator Bulb
Hyundai Sonata (2004-2014 / ) The front indicator bulb is integrated into the headlamp, but there is no room to access the bulb holder from the engine bay; you will need to reach …
Replacement of Front Headlamp Bulb
Replacement of Front Headlamp Bulb
Hyundai Sonata (1998-2005 / EF) Open the front bonnet and detach the protective cap of the bulb holder by turning it anti-clockwise; disconnect the power connector, unclip the bulb …
Replacing Front Headlight Bulb
Replacing Front Headlight Bulb
Hyundai Sonata (2004-2014 / ) To replace the front headlight bulb (H7 fitting), you do not need to remove the headlight. Simply rotate and remove the protective cap, disconnect th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos