Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Sonata
    4. : Headlight bulb replacement

Hyundai Sonata - Video tutorial

Model: Hyundai Sonata - Years 2004-2014
Part: Headlight bulb
Operation: Headlight bulb replacement

To replace the headlight bulb (H7 socket) it is not necessary to disassemble the headlight but just remove the protection cap by rotating it, unhook the power socket and the fixing spring; then extract the old bulb and insert the new one, taking care not to touch the bulb with your fingers and aligning the reference notch with its seat; then fix the bulb with the spring and hook the socket and then reposition the cap. It is suggested to replace both bulbs to ensure greater uniformity of light intensity.


Posted on 20 August 2023 by ScegliAuto



Headlight bulb replacement
Hyundai Sonata (1998-2005 / EF) Open the front hood and unhook the protective cap of the bulb holder by turning it anti-clockwise; disconnect the power supply socket, unhook the bul
Headlight bulb replacement
Hyundai Sonata (2004-2014 / ) Open the front hood and remove the protective cap of the lamp holder by turning it anticlockwise; then unhook the power socket of the bulb and the fi
Headlight bulb replacement.
Hyundai Sonata (1998-2005 / EF) To completely disassemble the front light assembly, open the bonnet and remove the two screws that secure the bonnet side light and the third located

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos