Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Ioniq
    4. : To reset the service indicator of the 2020 Hyundai IONIQ Electric, follow these steps: 1. Start the vehicle and make sure all doors are closed. 2. Press and hold the "OK" button on the steering wheel. 3. While holding the "OK" button, turn the ignition s

Hyundai Ioniq - Video tutorial

Model: Hyundai Ioniq MK 1 - Years 2016-2022
Part: Checks and maintenance
Operation: To reset the service indicator of the 2020 Hyundai IONIQ Electric, follow these steps: 1. Start the vehicle and make sure all doors are closed. 2. Press and hold the "OK" button on the steering wheel. 3. While holding the "OK" button, turn the ignition s

Resetting the service light on the 2020 Hyundai Ioniq Electric is very simple. After you have had a car service, it is possible for the light to remain on, so it will be necessary to perform a reset. Start by turning on the instrument panel and continue by pressing the arrow button, also known as the confirmation button, located on the steering wheel. After scrolling through the menu, stop at the "service interval" option and press "ok". Now you can set the new time interval from the new service to the next car service. Once you have completed this operation, turn off the car and turn it back on for further confirmation.


Posted on 17 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos