Do it yourself
| ||||
|
Hyundai Kona - Video tutorial
Model: Hyundai Kona
MK 1
- Years 2017-2023 Replacing the turn signal bulb on the Hyundai Kona is a very simple operation that can also be done independently. Let's begin the replacement by opening the vehicle's hood, turning the wheel inward, and lifting the vehicle. Next, open the small door located on the fender, using a flathead screwdriver, and disconnect the bulb from the connector in order to remove it. Once removed, proceed to insert the new bulb. Finally, insert the new bulb, connect the connector, and lower the vehicle back to the ground. Close the hood and position the wheel appropriately.
Posted on 5 February 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |