Do it yourself
Frequently asked questions about cars and motorcycles

How to Install Side Steps on a Hyundai Tucson

Model: Hyundai Tucson NX4, MK 4 - Years: 2022, 2023, 2024, 2025, 2026
Part: Body

See other generations:
Video tutorial

In this video, you will learn how to install side steps on a Hyundai Tucson. Remember that this accessory does not require any approval as long as it does not extend beyond the vehicle's outline or widen the track.

Our YouTuber recommends purchasing from Amazon Canada, which does not ship to Europe. However, we found a similar item on eBay at a lower price: it is code 115693762420, priced at £341.49 plus £39.50 for shipping.

Under the vehicle, there are already holes prepared for installation, making it easy to apply the bolts provided with the steps. You just need to remove the cover located under the bodywork, as shown in the video; near the rear wheel, there is a Phillips screw that needs to be removed inside the wheel arch, and the rest is all pressure-fitted.

Before inserting all that hardware into the holes, the YouTuber recommends spraying them with anti-rust preparation to prevent rust formation. Once the counter bolts are inserted, simply place the bolts through the step and tighten them.

There are also nice covers to hide them and ensure a clean finish.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

Hyundai Tucson (2022-2026 / NX4, MK 4) In this video, see how to fit mudguards on your Hyundai Tucson: the YouTuber uses original Hyundai parts, but you can also find them on Amazon, for e…
Hyundai Tucson (2004-2009 / JM, MK 1) To replace the heating radiator in the Hyundai Tucson, open the bonnet to disconnect the hoses connected to the radiator at the back of the engine ba…
Hyundai Tucson (2022-2026 / NX4, MK 4) This video tutorial, it is worth specifying, was filmed in a Hyundai i20, but since it concerns standard settings for Hyundai cars, it can also be co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos