Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the Tucson

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Warning light – error code

See other generations:
This video is currently unavailable

This guide shows how to reset the maintenance light on the Hyundai Tucson. It is recommended to perform this procedure only after servicing the vehicle.

This procedure is very simple and takes less than a minute to complete. To reset, turn the key to the first position to activate the instrument cluster without starting the engine.

Then, use the menu button located at the top left on the right side of the steering wheel to scroll to the maintenance light showing the remaining mileage until the next service. Once you reach the maintenance light, press and hold the OK button for a few seconds.

After the reset is complete, restart the instrument cluster, and the reset will be successful.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Hyundai Tucson?
How to reset the "Service" light on a Hyundai Tucson?
Hyundai Tucson (2022-2026 / NX4, MK 4) To reset the "Service" light on a Hyundai Tucson, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel to …
How to Reset the Service Light on a Hyundai Tucson?
How to Reset the Service Light on a Hyundai Tucson?
Hyundai Tucson (2015-2021 / MK 3, TL) Resetting the service light on a Hyundai Tucson, as shown in this tutorial, is an extremely simple and quick operation. Before doing this, ensure you…
How to reset the service light on the Hyundai Tucson.
How to reset the service light on the Hyundai Tucson.
Hyundai Tucson (2015-2021 / MK 3, TL) Below are the instructions for resetting the service maintenance light for the oil change on a Hyundai Tucson. First, get into the vehicle and turn o…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos