Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : How to replace the license plate light bulbs in the Hyundai Santa Fe?

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 3 - Years 2012-2018
Part: License plate light
Operation: How to replace the license plate light bulbs in the Hyundai Santa Fe?

In this tutorial we can see how to replace the license plate light bulbs in the Hyundai Santa Fe, a very simple and quick operation. First of all, make sure the key is not inserted, then go to the back of the vehicle, locate the screw that holds the outer glass of the light and unscrew it with a cross-point screwdriver. Then grab the bulb holder, rotate it slightly counterclockwise and remove it from the support. At this point we can separate the old bulb, insert the replacement, reassemble everything and repeat the operation on the opposite side.


Posted on 14 March 2024 by ScegliAuto

Other guides that may interest you

How to open the Piaggio Beverly saddle with a flat battery

In today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run.

Watch the video!


by ScegliAuto

More videos