Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the steering wheel airbag of the Hyundai I30?

Model: Hyundai I30 MK 2, GD - Years 2011-2016
Part: Airbag

In order to remove the steering wheel airbag of the Hyundai I30, you need to loosen the screws that hold it to its housing: these screws will be located in the lower rear part of the steering wheel itself. Once these have been unscrewed, it will be possible to proceed by removing the airbag from inside its housing: in this way it will be possible to disconnect the connector located inside, so that the new replacement airbag can be connected. This can now be inserted into its seat, securing it with the rear screws and verifying that everything works.

Posted on 10 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Steering Wheel Airbag from the Hyundai I30
Removing the Steering Wheel Airbag from the Hyundai I30
Hyundai I30 (2007-2012 / FD, MK 1) Follow the steps below to remove and replace the steering wheel airbag of the Hyundai I30. First, get into the vehicle and start by unscrewing the tw…
How to Remove the Steering Wheel from a Hyundai i30?
How to Remove the Steering Wheel from a Hyundai i30?
Hyundai I30 (2007-2012 / FD, MK 1) To remove the steering wheel from a Hyundai i30, unscrew the screws located at the bottom of the steering wheel, both on the right and left sides. By…
How to Remove the Steering Wheel Controls of a Hyundai i30
How to Remove the Steering Wheel Controls of a Hyundai i30
Hyundai I30 (2011-2016 / MK 2, GD) To replace the steering wheel controls of a Hyundai i30, you need to loosen the two screws located at the back of the steering wheel to remove the fr…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos