Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Brake Pads on an Infiniti Q50

Model: Infiniti Q50 V37, MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Brake pads

Video tutorial

You will need to remove the wheel where you will be replacing the brake pads. Lift your vehicle and place it on suitable axle stands.

Now, remove the bolts located on the rear of the brake that secure the caliper to the pads. Once you have lifted the caliper, you can easily remove the pads by pulling them outwards.

Refit the new components after comparing them with the old ones, then retrace the steps described for reassembly.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

Infiniti Q50 (2013-2024 / V37, MK 1) Your Infiniti Q50 has two air filters in the engine bay that ensure better airflow to the engine, preserving its efficiency and reliability. Below, w…
Infiniti Q50 (2013-2024 / V37, MK 1) Below are the steps to remove and replace the battery of the Infiniti Q50, following the instructions provided. First, open the bonnet of the vehicle…
Infiniti Q50 (2013-2024 / V37, MK 1) To replace the air filter of the Infiniti Q50, you will need to open the hood to access the components located inside the engine compartment. On the …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos