Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb on the Infiniti QX60?

Model: Infiniti QX60 L50 - Years 2013-2020
Part: Headlight bulb

In order to replace the headlight bulb of the Infiniti QX60 you have to go to open the hood, so that you can have access to the components in the back of the headlight. Here there will be the circular protective cover, which will have to be detached by removing the bulb that is inside. Once the bulb has been removed, it will need to be disconnected from its connector so that the new spare part can be connected. The latter can then be inserted inside the lighthouse covering everything with the special cover previously removed.

Posted on 30 May 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulb of the Infiniti QX60
Replacement of the front headlight bulb of the Infiniti QX60
Infiniti QX60 (2013-2020 / L50) Today's main steps will show us how to disassemble and replace the headlight bulb of the Infiniti QX60. First, let's move to the side and remove the …
Replacement of the front headlight bulb of the Infiniti QX60
Replacement of the front headlight bulb of the Infiniti QX60
Infiniti QX60 (2013-2020 / L50) Today's instructions will allow us to disassemble and replace the headlight bulb of the Infiniti QX60. In order to remove the xenon bulb, it will be …
How to replace the headlight bulb on your Infiniti QX60
How to replace the headlight bulb on your Infiniti QX60
Infiniti QX60 (2013-2020 / L50) In this short and simple guide we will see how to disassemble and replace the front light bulb of the Infiniti QX60. First we open the bonnet of our …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos