Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Isuzu
  4. :
  5. Isuzu Mu X
  6. : Instrument cluster

Isuzu Mu X - Instrument cluster

Isuzu Mu X (2020-2024 / MK 2)
How to set the date and time on an Isuzu Mu-x.

In this video, we see how to set the time and date on the instrument panel of the Isuzu Mu-x, which has two clocks: one in the center of the instrument panel …read all…
Posted on 6 June 2023 by ScegliAuto
Isuzu Mu X (2020-2024 / MK 2)
How to reset the Isuzu Mu X service light

In this new guide we are going to describe you a very simple and effective method which will allow you to reset the maintenance light on your Isuzu Mu X …read all…
Posted on 7 May 2023 by ScegliAuto

Car stereo (2) Battery (1) Glove box (1) Key (4) Air conditioning (1) -board computer (1) Checks and maintenance (3) Tail light (3) Air filter (1) Cabin air filter (6) Engine oil (1) Brake pads (2) Instrument cluster (2) Wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos