Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Isuzu
    3. :
  3. Isuzu Mu X
    4. : Checks and maintenance

Isuzu Mu X - Checks and maintenance

Isuzu Mu X (2013-2020 / MK  1, RF)
Resetting maintenance on Isuzu MU-X
Let's see how to reset the maintenance on an Isuzu MU-X vehicle, model produced from 2016 to 2021. Let's start the operation by turning on the vehicle's …read all…
Posted on 26 April 2024 by ScegliAuto
Isuzu Mu X (2013-2020 / MK  1, RF)
How to turn off the engine failure warning light in the Isuzu Mu X?
In this video we can see how to reset the engine failure warning light on the Isuzu Mu X without resorting to computerized instrumentation. The method is also …read all…
Posted on 17 July 2022 by ScegliAuto
Isuzu Mu X (2013-2020 / MK  1, RF)
How to reset the service in the Isuzu MU-X?
As we can see in this tutorial, resetting the service in the Isuzu MU-X is an extremely simple and fast operation. Before proceeding, make sure you have …read all…
Posted on 10 November 2022 by ScegliAuto
Car stereo (2) Battery (1) Glove box (1) Key (4) Air conditioning (1) -board computer (1) Checks and maintenance (3) Tail light (3) Air filter (1) Cabin air filter (6) Engine oil (1) Brake pads (2) Instrument cluster (2) Wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos