Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Car Stereo in the Isuzu MU-X

Model: Isuzu Mu X MK  1, RF - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Car stereo

See other generations:
Video tutorial

Today, you will see how to install a new car stereo in the Isuzu MU-X. Remove the climate control trim using a trim tool or a screwdriver. Next, detach the stereo console and disconnect the power connector and the antenna.

Now, you can install the new 2 DIN unit using the same connectors and mount it in the original location. Once you have completed all the steps carefully, proceed to test the car stereo.

After this, the operation is complete, and you can enjoy its functionality in your vehicle.


Updated on 8 July 2026 by ScegliAuto


Related tutorials

How to Change the Battery of the Isuzu Mu X 1.9
How to Change the Battery of the Isuzu Mu X 1.9
Isuzu Mu X (2013-2020 / MK  1, RF) In this video, see the main steps to remove and replace the battery of the Isuzu Mu X 1.9. First, open the hood and disconnect both battery terminals…
How to Turn Off the Check Engine Light on the Isuzu Mu X?
How to Turn Off the Check Engine Light on the Isuzu Mu X?
Isuzu Mu X (2013-2020 / MK  1, RF) In this video, we can see how to reset the check engine light on the Isuzu Mu X without using computerized equipment. This method is also valid for o…
How to Replace the Air Filter on an Isuzu MU-X?
How to Replace the Air Filter on an Isuzu MU-X?
Isuzu Mu X (2013-2020 / MK  1, RF) To replace the air filter on an Isuzu MU-X, open the hood to access the components inside the engine compartment. On the left side, you will find the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos