Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port of the Iveco Daily 2006 located?

Model: IVECO Daily MK 4 - Years 2006-2020
Part: Dashboard

If you do not know where the OBD2 port is located inside your Iveco Daily (2006), do not worry because you will find all the information you need in the following guide addressed to you. First of all, open the driver's side door and go inside the vehicle, then remove the small compartment located to the left of the steering wheel. Once you have done this, you finally have access to the OBD2 port you were looking for and can therefore connect any compatible diagnostic tool to it. In addition, next to the OBD2 port you will also find the cabin fuses.

Posted on 6 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD2 port located on the Iveco Daily?
Where is the OBD2 port located on the Iveco Daily?
IVECO Daily (2006-2020 / MK 4) The OBD2 socket on an Iveco Daily vehicle is located inside the vehicle's cabin. The position of the OBD2 socket is a bit inconvenient compared to ot…
Where is the OBD2 port located on the Iveco Daily 2001?
Where is the OBD2 port located on the Iveco Daily 2001?
IVECO Daily If you want to connect a professional diagnostic tool to your 2021 Iveco Daily but you don't know where the OBD2 port is located, all you have to do …
Where is the OBD2 port of the Iveco Daily located?
Where is the OBD2 port of the Iveco Daily located?
IVECO Daily (2006-2020 / MK 4) To find the OBD2 port inside your Iveco Daily's cabin, you need to carefully follow the steps described in the following guide and apply them step by…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos