Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you turn off the service light in the 2023 Iveco Daily?

Model: IVECO Daily MK 5 - Years 2014-2026
Part: Service warning light

The reference of the mentioned alert is the oil change of the engine and the oil filter, which is accompanied by a series of other tasks that need to be checked at each scheduled maintenance interval in the vehicle's maintenance program, such as the timing belt, accessory belt, etc. One important thing, after completing these interventions, is to reset the warning in the instrument panel, and one way to do this is shown in the video: a PC equipped with the appropriate diagnostic software is connected to the vehicle's OBD port, configured, and you navigate to the active alarms section, finally turning off the aforementioned warning.

Posted on 8 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) To reset the service light on the Iveco Daily, follow these steps: Turn on the Iveco Daily and ensure the service light is displayed on the dashboard…
How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) After performing the oil change, it is necessary to reset the service light; let's see how to reset it on the Iveco Daily. First, we get on board the…
How do you reset the Service light on the Iveco Daily?
How do you reset the Service light on the Iveco Daily?
IVECO Daily (2014-2026 / MK 5) The procedure for resetting the Service light on the Iveco Daily involves turning the key in the corresponding slot to turn on the instrument panel, …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos