|
Do it yourself
| |||
| ||||
How to replace the timing belt on a Fiat Iveco Daily 35-8 SOFIM?
Model: IVECO Daily
MK 2
- Years:
1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Video tutorial
This video shows how to replace the timing belt on an Iveco Daily with a SOFIM engine. First, disconnect the battery, then remove the complete front bumper (the headlights and indicators remain attached). You will also need to disconnect and remove the radiator, collecting the coolant. Now, align the engine by matching the hole on the flywheel with the reference on the timing cover; block the pulleys with 5 mm pins; loosen the tensioner by compressing it with pliers and check if the tensioner piston is at the end of its travel (if so, replacement is urgent!). Now install the new belt, ensuring the rotation direction of the engine is correct. Start from the top pulley and secure it with a tie wrap: slightly rotate the crankshaft counterclockwise to loosen; thread the belt and release the tensioner. For a final check, manually rotate the engine two complete turns. Recheck the alignment of the references, and if everything matches, remove the locking pins. Reassemble all components (covers, pulleys, radiator, bumper, battery). Start the engine briefly, without coolant, to check operation. Always set the timing before disassembly, and replace the water pump if driven by the timing belt.
Posted on 11 September 2026 by ScegliAuto
Related tutorials
IVECO Daily
In this guide, we will go through the steps to remove and replace the timing belt of the Iveco Daily. First, open the bonnet and remove the front bum…
IVECO Daily
(1999-2006 /
MK 3)
In today's tutorial video, you will see the main instructions for removing and replacing the timing belt on the Iveco Daily 2.3 Diesel, as well as on…
IVECO Daily
This guide shows you how to remove and replace the timing belt on the Iveco Daily, following the instructions below. To access the timing belt, you w…
Other guides you may be interested in
|
How to Open the Fuel Filler Flap in the Hyundai i30?
In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.144
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |