|
Do it yourself
| |||
| ||||
Temperature Issue on the Iveco Daily
Model: IVECO Daily
MK 4
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
The issue highlighted in the video regarding the Iveco Daily 130 is the P1000 error, related to the coolant pressure sensor in the water reservoir, which is contaminated with engine oil. The likely cause is a failure of the oil/water intercooler (oil radiator integrated into the main radiator). Oil enters the cooling circuit through an internal crack; the reservoir cap is faulty; it does not regulate the pressure, causing leaks and overheating. The thermostat or temperature sensor may be faulty, worsening thermal control. Necessary interventions include a complete system clean (draining the radiator, engine, and ducts with specific products to remove residual oil) and replacing critical components - Test the water pump. The estimated cost is not low: a new intercooler/radiator costs between £425 and £510, system cleaning is no less than £170, and labour requires at least 6 hours of work.
Posted on 24 March 2026 by ScegliAuto
Related tutorials
IVECO Daily
(2006-2020 /
MK 4)
In this video, see how it was possible to repair the indicator switch on an Iveco Daily. The YouTuber removed the component to take a look in order t…
IVECO Daily
(2014-2026 /
MK 5)
As the YouTuber tells us, it is true that there is a problem with the fuel pump on the Iveco Daily 35-150, especially on the F1A or F1C Euro 6 engine…
IVECO Daily
Through this very short video tutorial, you can see the diagram of the main fuse box for an Iveco Daily, a model produced from 2000 to 2006. The diag…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Adjust the Rear Seats of the BMW X1
In this video, see how the BMW X1's cargo area can be used to transport large loads. To expand this area, the rear seat can be folded down with a 40/20/40 split, each section can be folded separately or all together. The seats can be adjusted independently to provide more space for passengers or cargo: to do this, pull the handle located at the bottom and push or pull as needed. To position the backrest in the desired position, there is a cordura handle on the left side. Inside the trunk, there are buttons that automatically fold the backrests of the rear seats forward, but only after ensuring they are clear. They can be returned to an upright position manually using the cordura handle. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.078
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |