Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Iveco Daily

Model: IVECO Daily MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

The steps to reset the service light on an Iveco Daily are simple and quick, but it is important to remember to perform them only after completing all required service tasks, such as replacing various filters and fluids. To reset the light: - Press the accelerator pedal while turning on the instrument cluster; - Press the brake pedal six times; - Release the brake pedal; - Turn off the instrument cluster; - Release the accelerator pedal.

After a few seconds, turn on the instrument cluster again to check that the reset was successful.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) To reset the service light on the Iveco Daily, follow these steps: Turn on the Iveco Daily and ensure the service light is displayed on the dashboard…
How to Reset the Service Light on an Iveco Daily?
How to Reset the Service Light on an Iveco Daily?
IVECO Daily Today, let's learn how to reset the oil change service light on an Iveco Daily by following the instructions below. First, get inside the vehicle and…
Service Reset on a 2020 Iveco Daily
Service Reset on a 2020 Iveco Daily
IVECO Daily (2014-2026 / MK 5) Today, see how to perform the service reset on a 2020 Iveco Daily. To reset the oil light on your Iveco Daily, follow these simple steps. Start with …

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos