Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jaguar
    3. :
  3. Xf
    4. : What is the fuse diagram on the Jaguar XF?

Jaguar Xf - Video tutorial

Model: Jaguar Xf MK 1 - Years 2008-2015
Part: Fuse box
Operation: What is the fuse diagram on the Jaguar XF?

In the Jaguar XF there are 3 fuse boxes, in this video we can see their position and the relative diagrams. The main box is located inside the engine compartment on the passenger side, accessible by first removing the plastic cover held firmly by 4 rivets. We can find the second box inside the dashboard again on the passenger side, covered by a flap, while the third is located inside the luggage compartment, on the right wall, also covered by a flap. Remember to always replace a blown fuse with one of equivalent amperage.


Posted on 21 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Xf 2008-2015 - Where is the Jaguar Xf windshield washer pump fuse located? Read Answer
    • Xf 2008-2015 - Where is the Jaguar XF windshield washer pump fuse located? Read Answer
    • Xf 2008-2015 - What is the location of the washer pump fuse on the Jaguar Xf? Read Answer
    • Xf 2008-2015 - What is the location of the windshield washer fuse on the Jaguar Xf? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos