Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Retrieve the Radio/Navigator Code for a Jaguar XJ X350

Model: Jaguar Xj X350 - Years: 2003, 2004, 2005, 2006, 2007
Part: Warning light – error code

See other generations:
Video tutorial

In today's video, you will see the procedure necessary to retrieve the radio or navigator code for the Jaguar XJ X350 by following these simple steps. First, get inside the vehicle and start by removing the gear lever cover; remove the rear screws to detach and remove the centre console, as shown in the video.

At this point, dismantle the central instrument panel by unscrewing the screws on the sides of the radio; remove the radio by disconnecting the electrical cables at the back. You will now find the radio code on the back of the unit, which you should memorise to enter it once the radio is installed.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Heater Radiator in the Jaguar XJ
Guide to Replacing the Heater Radiator in the Jaguar XJ
Jaguar Xj (2003-2007 / X350) This guide provides the main instructions for removing and replacing the internal heater radiator of the Jaguar XJ. First, open the bonnet and discon…
How to Replace the Battery in a Jaguar XJ?
How to Replace the Battery in a Jaguar XJ?
Jaguar Xj (2003-2007 / X350) To replace the battery in a Jaguar XJ, open the boot to access the luggage compartment. The battery is located under the carpet, which must be lifted…
How to reset the service light on the Jaguar XJ
How to reset the service light on the Jaguar XJ
Jaguar Xj (2003-2007 / X350) The service light related to the car service turns on on the instrument panel of the 2008 Jaguar XJ when it is necessary to perform the car service. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos