Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Oil Maintenance Light on a 2018 Jaguar XE

Model: Jaguar Xe MK 1 - Years 2015-2024
Part: Service warning light

In this video tutorial, see how to reset the oil maintenance light on a 2018 Jaguar XE by following a few simple steps. The first thing to do is perform maintenance on the vehicle, such as changing the engine oil and filters. Ensure the bonnet is open; after completing the DIY maintenance, get in the car, turn on the ignition without starting the engine, and open the driver's door, leaving it open. Now press the brake pedal and the accelerator pedal simultaneously for about 10 seconds; release the pedals and turn off the car. Then restart the car; at this point, the service reset should be completed.

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Jaguar XE
How to Reset the Service Light on a Jaguar XE
Jaguar Xe (2015-2024 / MK 1) To reset the service light on a Jaguar XE, enter the vehicle and turn on the instrument panel without starting the engine. Press the brake and accele…
How to Add Power Steering Fluid to a Jaguar XE
How to Add Power Steering Fluid to a Jaguar XE
Jaguar Xe (2015-2024 / MK 1) Hello, in this video you will see how to add power steering fluid to your Jaguar XE. Place your car on a ramp and remove the wheel. Then, open the bo…
How to reset the service of the Jaguar XE
How to reset the service of the Jaguar XE
Jaguar Xe (2015-2024 / MK 1) In this video we can see how to reset the service light on a right-hand drive Jaguar XE. First, turn on the instrument panel, open the passenger door…

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos