Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the partial odometer of the Jaguar XE?

Model: Jaguar Xe MK 1 - Years 2015-2024
Part: Warning light – error code

In order to replace the partial odometer of the Jaguar XE, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is on, you need to press and hold the button located at the end of the lever on the left side of the steering wheel. By holding down the button for a few seconds, you can verify that the partial odometer has been completely reset; at the end of the reset procedure, you can turn off the instrument panel by removing the key from the slot.

Posted on 16 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the AdBlue warning light on the Jaguar XE?
Jaguar Xe (2015-2024 / MK 1) In order to reset the AdBlue warning light on the Jaguar XE, you need to refill the additional fluid by pouring the necessary amount into the tank; t…
How do you reset the tire pressure warning light on the Jaguar XE?
How do you reset the tire pressure warning light on the Jaguar XE?
Jaguar Xe (2015-2024 / MK 1) In order to reset the tire pressure warning light of the Jaguar XE, you need to inflate the tires until they are brought back to the correct pressure…
Where to Find the Fuse Box of the Jaguar XE
Where to Find the Fuse Box of the Jaguar XE
Jaguar Xe (2015-2024 / MK 1) To locate the fuse box of your Jaguar XE, you only need a few seconds. Follow these steps. First, park your Jaguar XE safely on a flat surface. Then,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos