Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Add Power Steering Fluid to a Jaguar XE

Model: Jaguar Xe MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Steering wheel

Video tutorial

Hello, in this video you will see how to add power steering fluid to your Jaguar XE. Place your car on a ramp and remove the wheel. Then, open the bonnet of your vehicle.

On the left, behind the water reservoir, is the power steering fluid reservoir. Unscrew the cap and add your fluid.

While adding the fluid, someone should turn the steering wheel to assist you. When you see the fluid level drop, add more. When you notice the steering feels light enough, it means the fluid is at the correct level.

Once finished, you can screw the cap back on. Your work is complete.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to top up AdBlue in a Jaguar XE?
Jaguar Xe (2015-2024 / MK 1) In this tutorial, you will see how to top up AdBlue in a Jaguar XE, a very simple and quick operation to perform after the relevant warning light ill…
Draining and Replacing Radiator Fluid
Draining and Replacing Radiator Fluid
Jaguar Xe (2015-2024 / MK 1) If the engine is overheating, this guide will show you how to drain the coolant. First, lift the car while observing all safety regulations. Next, on…
How to reset the AdBlue warning light in the Jaguar XE?
How to reset the AdBlue warning light in the Jaguar XE?
Jaguar Xe (2015-2024 / MK 1) If the AdBlue warning light in the instrument panel of our Jaguar XE comes on, it means that the pollution control system fluid has reached the minim…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos