Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Service warning light

In this video we can see how to reset the service light of a Jeep Grand Cherokee: so we turn on the ignition and press the accelerator pedal all the way down three times. This should be enough to reset the service light. However, there were many conflicting voices among the comments in the video, because there are multiple versions of this model, and many suggest this system: turn on the ignition, keep the accelerator pedal pressed for about 30 seconds and at the same time press and release the brake pedal all the way down 6 times. Turn off the ignition and the service will be reset.

Posted on 7 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light of the Jeep Grand Cherokee 2012
How to Reset the Service Light of the Jeep Grand Cherokee 2012
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) The procedure to correctly reset the service light of your 2012 Jeep Grand Cherokee is very simple, and with this guide, you will complete it without…
How to Reset the Service Light on a Jeep Grand Cherokee?
How to Reset the Service Light on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To reset the Service light on a Jeep Grand Cherokee, press the ignition button after inserting the key to turn on the instrument cluster without star…
How to reset the "Service" light on a Jeep Grand Cherokee?
How to reset the "Service" light on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To reset the "Service" light on a Jeep Grand Cherokee, start by turning on the instrument panel without starting the engine. Use the buttons on the s…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos