Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

This video shows how to reset the oil light on a Jeep Grand Cherokee produced from 2010 to 2021. The procedure is very simple and quick, taking less than a minute. Just turn on the ignition without starting the engine, then press the accelerator pedal three times to the floor.

In the automatic version, the procedure must be done with the gearbox in Park mode. For safety, in the manual version, it is advisable to put the car in neutral.

As mentioned, this procedure takes only a few seconds.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a Jeep Grand Cherokee
How to Reset the Oil Light on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Before starting, sit in the driver's seat of your Jeep Grand Cherokee. Turn the key in the ignition switch without activating the instrument cluster.…
How to Reset the Oil Light on the 2012 Jeep Grand Cherokee
How to Reset the Oil Light on the 2012 Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To correctly complete the manual reset of the engine oil light on your 2012 Jeep Grand Cherokee, follow these simple steps. First, enter the vehicle …
How to Manually Reset the Oil Light on the Jeep Grand Cherokee 4
How to Manually Reset the Oil Light on the Jeep Grand Cherokee 4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this guide dedicated to all owners of a Jeep Grand Cherokee fourth series, discover how to correctly and manually reset the engine oil light. Firs…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos