Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight switch in the Jeep Cherokee?

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, see how to replace the headlight switch in the Jeep Cherokee, a very simple and quick operation. First, ensure that the key is not inserted for safety.

Then, using a flathead screwdriver or preferably a plastic spatula to avoid leaving marks, pry along the edge of the switch until it detaches from the dashboard. Next, disconnect the power connector, connect the replacement, and fit it completely into the housing.


Updated on 30 October 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulbs on the Jeep Cherokee Mk5
How to Replace the Headlight Bulbs on the Jeep Cherokee Mk5
Jeep Cherokee (2013-2023 / KL, MK 5) This guide shows how to replace the headlight bulbs on the Jeep Cherokee Mk5. First, ensure the vehicle is secure and turn the steering wheel in the …
How to Replace the Headlights on a 1990 Jeep Cherokee XJ
How to Replace the Headlights on a 1990 Jeep Cherokee XJ
Jeep Cherokee (1984-2001 / MK 2, XJ) In today's video, you will see how to remove and replace the front headlights on a 1990 Jeep Cherokee XJ, first series, by following these simple and…
Where is the fuse box in the Jeep Cherokee?
Where is the fuse box in the Jeep Cherokee?
Jeep Cherokee (2013-2023 / KL, MK 5) The fuses in the Jeep Cherokee are located inside the designated fuse boxes within the vehicle: this model has two. The first is positioned behind th…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos