Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Spark Plugs from a Jeep Grand Cherokee

Model: Jeep Grand Cherokee MK 2, WJ - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Spark plugs

See other generations:
Video tutorial

Follow this guide to remove spark plugs from a Jeep Grand Cherokee. Open the engine bay, lift the front bonnet, and secure it. Remove the coil bar from the cylinder head using a screwdriver, then unscrew the spark plugs with a socket spanner and pull them out of the cylinder head.

Take the new spark plugs and guide them into the cylinder head with the extension of the socket spanner, tighten them and connect the ignition coils to each spark plug. Finally, close the engine bonnet and test the correct operation by starting the car.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

Instructions for Changing Spark Plugs
Instructions for Changing Spark Plugs
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) If you need to change the spark plugs, first remove the air filter. To do this, loosen the two clamps and the support bar secured with two bolts on e…
What is the radio code for a Jeep Grand Cherokee and how to enter it?
What is the radio code for a Jeep Grand Cherokee and how to enter it?
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) After replacing the battery in your Jeep Grand Cherokee, the radio may reset and lock. To unlock it, you need to enter the unlock code. Start by sitt…
How to Reset the Oil Light on a Jeep Grand Cherokee
How to Reset the Oil Light on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Before starting, sit in the driver's seat of your Jeep Grand Cherokee. Turn the key in the ignition switch without activating the instrument cluster.…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos