Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

If you own a Jeep Grand Cherokee and want to learn how to correctly reset the oil light manually, all you have to do is carefully read the following guide and apply the described procedure. First, get into the car and turn on the diagnostic mode, then press the accelerator pedal three times consecutively.

Once you have done this, you can turn off and turn on the ignition again to complete the reset procedure. If there are any errors, you can repeat all the steps from the beginning without any problems.


Posted on 8 April 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a 2018 Jeep Grand Cherokee
How to Reset the Oil Light on a 2018 Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this guide for all of you who own a 2018 Jeep Grand Cherokee, you will learn how to correctly perform the manual reset procedure for the oil light…
How to reset the oil light on the Jeep Grand Cherokee
How to reset the oil light on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) If you want to manually reset the oil light on the central display of the instrument panel of your Jeep Grand Cherokee, just follow the steps describ…
How to Reset the Oil Light on the 2016 Jeep Grand Cherokee
How to Reset the Oil Light on the 2016 Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) If the oil light on the dashboard of your 2016 Jeep Grand Cherokee (fourth generation) comes on and you want to reset it manually, follow these steps…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos