Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021
Part: Service warning light

If you want to manually reset the oil light on the central display of the instrument panel of your Jeep Grand Cherokee, just follow the steps described in the following guide. The first thing you need to do is turn on the instrument panel of the car and then navigate through the various screens of the display using the directional buttons located on the steering wheel. Once you have located the screen showing the remaining life of the engine oil, you need to press and hold the "OK" button until the oil light is reset. Finally, turn off the car's instrument panel.

Posted on 5 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a 2021 Jeep Grand Cherokee
How to Reset the Oil Light on a 2021 Jeep Grand Cherokee
Jeep Grand Cherokee (2021-2026 / MK 5, WL) To manually reset the oil light on your 2021 Jeep Grand Cherokee, follow the steps outlined in this guide. Start by entering the cabin, then insert t…
How to Reset the Oil Light on a Jeep Grand Cherokee
How to Reset the Oil Light on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Before starting, sit in the driver's seat of your Jeep Grand Cherokee. Turn the key in the ignition switch without activating the instrument cluster.…
How to Reset the Oil Light on the 2012 Jeep Grand Cherokee
How to Reset the Oil Light on the 2012 Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To correctly complete the manual reset of the engine oil light on your 2012 Jeep Grand Cherokee, follow these simple steps. First, enter the vehicle …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos