Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Cabin air filter

Remove the pollen filter on the Jeep Compass. Open the glove compartment and detach the plastic guides located at the sides of the drawer, rotate the glove box forward, and pull it away from the dashboard; disconnect the cap and slide the air filter out of its housing (as shown in the video). Once this is done, insert the new air filter into the filter holder (ensure the filter is inserted correctly without bending it). Finally, refit the cap of the filter box and all components of the glove compartment as they were removed earlier.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Cabin Air Filter on a Jeep Compass
How to Remove and Replace the Cabin Air Filter on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) To remove and replace the cabin air filter on a Jeep Compass, open the glove compartment and pull down the drawer using a plastic lever (use a screwd…
How to Replace the Cabin Filter in the Jeep Compass?
How to Replace the Cabin Filter in the Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) As shown in this tutorial, replacing the cabin filter in the Jeep Compass is a very simple and quick task. First, go to the passenger side, then open…
How to replace the cabin air filter of the 2022 Jeep Compass
How to replace the cabin air filter of the 2022 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today we will explain how to replace the cabin air filter on the 2022 Jeep Compass. The filter is located inside the cabin, behind the glove compartm…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos