Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Jeep Avenger.

Model: Jeep Avenger MK 1 - Years 2022-2026
Part: Cabin air filter

Today we will explain how to remove and replace the cabin air filter of the Jeep Avenger. To remove the filter, it is important to disassemble the bottom part of the glove compartment. Using a 25 mm Torx wrench, we will unscrew the nuts that secure the bottom of the glove compartment. We open the glove compartment to remove it. We remove the cover of the filter box by unscrewing the screw located above it and pressing on the side. We extract the worn filter and insert the new one. We remind you that for Jeep vehicles, the filters are divided into two parts. Once the new air filter is in place, we close the cover of the box and proceed with reassembling the glove compartment.

Posted on 4 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on the Jeep Avenger
How to Set the Clock on the Jeep Avenger
Jeep Avenger (2022-2026 / MK 1) Today's instructions will allow you to adjust the clock on the central display of the Jeep Avenger. First, get inside the vehicle and navigate to the…
How do you reset the tire pressure light on the Jeep Avenger?
How do you reset the tire pressure light on the Jeep Avenger?
Jeep Avenger (2022-2026 / MK 1) To reset the tire pressure warning light of the Jeep Avenger, you need to inflate the tires until they reach the recommended pressure value: this pre…
How to Replace the Key Battery on a Jeep Avenger
How to Replace the Key Battery on a Jeep Avenger
Jeep Avenger (2022-2026 / MK 1) In this guide for Jeep Avenger owners, you will learn how to replace the battery inside your vehicle's key. First, obtain a flat-head screwdriver and…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos