Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Emblem on the Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Manufacturer emblem

If you want to replace the front emblem of your Jeep Compass, here is the video for you. First, you need to obtain the original emblem: if you want it chrome, you can find it on eBay with code 125742479784 for £35.90, with free delivery. If you prefer it black (which is for the Renegade), you can also find it on eBay with code 235848891435 for £14.99, also with free delivery. Clean the area thoroughly, which you have already freed from the old badge, carefully removing it with dental floss. It would be better to have taken references beforehand, to ensure you place it back in the same position as before! Remove the adhesive protectors and press firmly onto the bodywork, then remove the adhesive from the top, and enjoy the result.

Posted on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight on a Jeep Compass
How to Replace the Front Headlight on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Before starting, open the front bonnet of your Jeep Compass. Begin by disassembling and removing the front bumper by unscrewing the fastening screws …
How to Replace the Front Headlight Bulb of a Jeep Compass
How to Replace the Front Headlight Bulb of a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Before you begin, open the front bonnet of your Jeep Compass. Start by disconnecting the electrical connector attached to the blown bulb, using a fla…
Replacing Headlight Bulbs on Jeep Compass
Replacing Headlight Bulbs on Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Need to replace damaged front headlight bulbs on a Jeep Compass? Here’s how to do it. Open the bonnet by pulling the lever located at the bottom righ…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos